Showing posts with label Real Action Marker. Show all posts
Showing posts with label Real Action Marker. Show all posts

Thursday, December 6, 2007

Keeping your RAM in tip-top shape!


In most training scenarios and tactical paintball games, the RAM is the best and most effective replica firearm to date, able to give the shooter the exact feel of a real rifle or pistol without the danger of fatal accidents.

But the effectiveness of the RAM is greatly dependent on how well you maintain it. Negligent use is most often the cause of RAM malfunction in the field. A good shooter is one who knows his gun well and is able to maintain it properly so that it remains in tip-top condition throughout the training dates or real action games.

As such, ATACS has prepared 5 quick tips on how best to maintain your RAM and ensure that you will be able to shoot during your game schedules.

#1 – Never leave your CO2 cylinder turned on overnight.

This is the most important tip that we can give you and we learned it through expensive experience. Leaving the CO2 cylinder in the ON position for more than 5 hours can be very damaging to the O-rings inside your RAM’s Core Unit. The cold temperature of the CO2 gas can make the rubber rings brittle and more susceptible to breakage if you leave the gas on. The result will be erratic, sticky firing or even sudden leaks. Sustained pressure may also damage the plastic valves and other parts within the Core Unit.

In order to prevent this, it is always best to turn off first your CO2 cylinder then discharge the remaining CO2 by firing your RAM until the air runs out. Then disassemble the CO2 cylinder from the RAM so that you won’t accidentally turn it on. Make this an after-game habit and you will save more than just a few dollars in maintenance parts and service.

#2 – Do not tinker with the Core Unit unless you are a trained RAM technician

Although the RAM looks like a real gun, its Core Unit does not, in any way, function like a real gun’s internals. The Core Unit is a sensitive collection of parts that serve to channel pressurized air to achieve the gun’s functionality. Unless you are a trained technician, never attempt to fiddle around or worse break apart your gun’s Core Unit. Doing so may void your warranty, damage your gun or even lose some of the small parts that comprise your RAM.

You can, however, diagnose the problems that you are experiencing with your RAM so that you can communicate it to the technicians at your nearest RAM service center. The Core Unit is divided into four parts, basically the pressure unit, trigger unit, launch unit and the rate of fire. Knowing where the problem may be occurring can help save time in repairing your gun.

If the gun appears to fire erratically or seems to stick for a split second before firing, there could be a leak in the pressure unit.

If the gun fires on its own, even on safe mode that means that there is a damaged part or O-ring in the trigger unit.

If the gun’s fire rate sounds slow, a small adjustment is only needed to be done by the RAM technician. The rate of fire may be adjusted to your preference, but a setting that is too fast might result in jammed shells in the shell ejector port.

In cases when the paintball shells repeatedly jam in the ejector port, then the problem is in the Launch Unit. Ask the RAM technician to see if the spring on the cartridge rod is broken. There are times that the cartridge rod itself may be worn out, making it unable to function properly. Have the necessary parts replaced and your RAM will return to its tip-top shape.

#3 – Regularly check the external O-ring on your refillable CO2 cylinder

A RAM user’s worst nightmare is to go out into the field and suddenly discover that you no longer have any CO2 pressure in your gun. No pressure means you can no longer shoot back, hence you were already a casualty and you didn’t even know it.

The most common culprit for this is a damaged O-ring on the external part of your refillable CO2 cylinder. This O-ring is most susceptible to small tears, cuts and even breaks since it is repeatedly subjected to extreme temperature changes (from charging the cylinder to using it in the field). Always make sure to wipe the O-ring down with some oil or silicon spray and examine it closely for the smallest cuts. Also be conscious of the amount of shots your tank is able to give out. A 60 gram refillable tank can deliver 60-80 strong shots before losing power, a 45 gram tank 50-60 shots, while a 30 gram tank give approximately 30-40 shots. If the rate of shots appears to decline for the type of cylinder that you are using, chances are the O-ring is damaged and you have developed a small leak. Change it immediately to avoid further deterioration of your RAM’s functionality.

#4 – Clean the barrel after every game and before storing your RAM

Some RAM users believe that since their RAM is not a real gun, basic gun maintenance such as cleaning the barrel can be skipped. This is a bad habit to develop. The barrel of the RAM is the one that controls the direction of the paintball as soon as it is ejected from the magazine. Any dirt or paint residue will affect the paintball’s flight or worse, cause it to burst while it is still in the barrel.

To avoid this messy situation, you simply have to use the supplied squeegee, cleaning cloth and oil to clean out the barrel. Pour a few drops of oil on the cloth then insert the squeegee into the ejector port and pull it along until it draws out the dirt and residue out of the muzzle. Don’t do it in reverse, because you will be pulling in the debris into the gun if you do that.

#5 – Always place a few drops of oil or spray silicone into the buttstock CO2 port of your RAM before attaching the CO2 cylinder

One of the best maintenance habits that a RAM user must practice is remembering to place a few drops of oil or spraying silicone into the buttstock CO2 port before placing the CO2 cylinder into the gun. The oil or silicone spray will be pushed into the Core Unit by the CO2 pressure, lubricating the O-rings and internal parts of the gun and allow it to function at optimum condition. This also lessens service time, since the internal parts are preserved and protected by the oil or silicone from regular wear and tear.

Friday, November 30, 2007

Real Action Marker FAQs (Series 1)

“It’s everything you wanted to know about the RAM but were afraid to ask.”

What is a Real Action Marker? Is it an airsoft or paintball gun?

Technically the Real Action Marker or RAM is a hybrid of both airsoft and paintball technologies. But because the RAM was designed for use as a tactical training tool, it also falls under the classification of “simulated ammunition” weapons which are essential for realistic, force-on-force training. The marking capability of the RAM is made possible through the .43 caliber paintball ammo that it fires.

As a replica weapon, it looks, weighs and feels remarkably like the M4 A2 that it was modeled after, while the RAM pistols are designed like the Glock 17 and the Sig Sauer P226 and the RAM shotgun was fashioned after the FN riot shotgun.

The RAM has been literally called the next generation of simulated ammunition weapons since it offers realism and marking capabilities at a more affordable cost.

What powers the RAM?

The RAM employs CO2 as a propellant, although green gas (Nitrogen) and even compressed gas can be used to fill its tank. However, based on actual field use, the CO2 propellant performs more consistently than other gas formats.

How powerful is the RAM? What is its range? Does it hurt?

The stock model of the RAM M4 has a pressure setting of 2.8 MPa which results in a muzzle velocity of 350 FPS. However, the pressure setting can be adjusted to yield a higher FPS. The only draw back is that at a high Pressure/FPS setting, the risk of paintball ammo exploding inside the barrel is greater. In our field tests, we were able to crank up the FPS to about 450 without ball breakage, but it is probably best to use rubber rounds at high FPS modes.

Compared to the velocity of a real bullet, the FPS of a RAM is slow. You can actually see the paintball round coming towards you. But since it is used for simulation training, the FPS setting is optimal to avoid grave injury.

The published effective range of the RAM is about 120 feet, after which the paintball begins to drop. Wind can also affect the movement of the round, so users must immediately take this into account before taking the shot. A sniper belonging to the PNP Regional Special Action Unit was able to hit a moving target three times on the head at a distance of 170 feet. But this incredible feat was done because of the tremendous skill of the sniper rather than the performance of the RAM.

Like any projectile, whether it be BB pellets or paintball, there is the element of pain involved when receiving a hit. But in training, it has been said that the best teacher is pain, so operators get to learn which of their tactics work and which doesn’t. But never fear, because the .43 caliber paintballs don’t penetrate the skin. The worst injury comes in the form of bruises or hematomas which gradually fade away after awhile. There is a danger of being blinded by the paintball if it hits unprotected eyes, so always remember to wear protective eyewear or full masks when using the RAM.

Can the RAM be loaded with a real bullet?

Although designed to look like a real gun, the RAM’s safety feature is that it won’t absolutely be able to fire real ammunition. Firstly, the magazine of the rifles and pistols can only chamber the .43 caliber paintball and aluminum shell casings. Secondly, the barrel has no rifling and will not take the size of a real bullet. But the most important safety fact of the RAM is that it propels the paintball ammo via air pressure and as such it does not have a firing pin to set off real rounds.

How will the paintball ammo be loaded into the RAM?

Unlike traditional paintball guns which uses a gravity-feed system, the RAM employs a spring-loaded magazine system that functions similar to regular M4 mags. The ammo is loaded by hand one by one, with the shells encasing the paintball round. Each RAM rifle magazine has a max load of 20 rounds, while the RAM pistols carry 9 rounds per clip.

Can the paintballs be loaded without the aluminum shell?

Yes, but only if you are using the RAM pistols. With the RAM rifles, the aluminum shell is essential in protecting the paintball from being squeezed together while also adding to the realism of the gun. The shells are ejected every time the gun is fire, replicating the brass ejection action of the real select-fire weapons.

How does one fire a RAM? Is it single or auto fire?

Just like the real guns it is modeled after, the RAM guns fire by applying pressure on the trigger. Unlike airsoft guns which use electronic triggers, the RAM requires a bit of trigger pull to fire. The RAM also features a select fire system, meaning the user can either shoot in single or full-auto modes. To be able to fire in bursts, the user must first set the RAM in full-auto mode and squeeze the trigger for about 2 seconds.

For the pistols, the setting is semi-auto fire, while the shotgun employs a single-shot pump action system.